– Acceptance of certificates when the system time has not yet been synchronized: This is the case when Network Mode is set to PPPoE under the Network > Interfaces, General menu item, and Automatic Re-connect is set to Yes (see "PPPoE" on page 145 ). – Interruption of the connection at a certain time using PPPoE network mode: This is the case when the Time schedule setting is selected under the Management > Central Management, Configuration Pull menu item for the Pull schedule setting (see "Management > Configuration Profiles" on page 93, "Configuration Pull" on page 113). – Time-controlled pick-up of configuration from a configuration server: In the case of the FL MGUARD RS4000/RS2000, the rechargeable battery lasts at least five days.
– Battery (only mGuard Centerport (Innominate), FL MGUARD CENTERPORT, mGuard delta (Innominate) ) Power supply of the built-in clock is ensured by the following components: The state of the clock only returns to “Not synchronized” if the firmware is reinstalled on the device or if the built-in clock has been disconnected from the power for too long. Devices with a built-in clock usually start in “Synchronized by hardware clock” mode. Selection list for selecting the appropriate keyboard layout.ĭevices without built-in clock always start in “Not synchronized” mode. The settings for using a keyboard can only be made for the mGuard Centerport (Innominate) and FL MGUARD CENTERPORT devices. (Only mGuard Centerport (Innominate), FL MGUARD CENTERPORT ) The name of the contact person responsible for the mGuard, ideally including the phone number. (Under SNMP: sysName)Ī description of the installation location that can be freely assigned, e.g., “Hall IV, Corridor 3”, “Control cabinet”. If the user enters the domain name in an abbreviated form, the mGuard completes the entry by appending the domain suffix that is defined here under “Domain search path”.Ī name that can be freely assigned to the mGuard for administration purposes, e.g., “Hermes”, “Pluto”. This option makes it easier for the user to enter a domain name. If the “User defined” option is selected under Hostname mode, enter the name that should be assigned to the mGuard here.
If the selected network mode permits external setting of the host name, e.g., via DHCP, the name supplied by the provider is assigned to the mGuard. If the mGuard is running in Stealth mode, the “User defined” option must be selected under “Hostname mode”. (Default) The name entered in the Hostname field is the name used for the mGuard. Assigning names simplifies the administration of multiple mGuard devices. This name is then displayed, for example, when logging in via SSH (see "Management > System Settings" on page 47, "Shell Access" on page 56). You can assign a name to the mGuard using the Hostname mode and Hostname fields. Any intrusion and its attempt without permission is illegal and strictly prohibited. The usage of this mGuard security appliance is reserved to authorized staff only. The (repeated) display of the message can be disabled by the customer using a suitable SSH.
(only mGuard Centerport (Innominate), FL MGUARD CENTERPORT, not with firmware 7.6.0)įreely selectable text for a system use notification that is displayed before logging on at the mGuard device (maximum 1024 characters). (Only TC MGUARD RS4000 3G, TC MGUARD RS4000 4G, FL MGUARD RS4000, FL MGUARD RS4004, mGuard Centerport (Innominate), FL MGUARD CENTERPORT, FL MGUARD RS, FL MGUARD GT/GT )Īn SNMP trap is triggered if the temperature exceeds or falls below the specified temperature range.
0 kommentar(er)
